600FD816
Deck-Mounted Faucet with 8" Centers and 16" Swing Spout
Other Available Sizes
Features
-
16" swing spout with 2 GPM aerator
-
8" adjustable centers, 1/2" NPS inlets
-
Temperature rating 40 - 140 degrees Fahrenheit
-
Chrome-plated brass construction
-
Leak-resistant quarter-turn ceramic cartridges with check valves
Certifications
-
NSF/ANSI 61 & 372
This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.
-
NSF Listed
This item has been certified by NSF International to meet applicable product standards on public safety, health, and / or the environment.
-
CSA, US and Canada
This product has been certified by the Canadian Standards Association (CSA) to meet select standards for electrical, plumbing, and/or mechanical products in the United States and Canada.
-
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.
This Regency deck-mounted faucet is the perfect solution when you need a dependable water fixture in your facility!
Perfect for busy commercial kitchens, Regency faucets provide the industry-leading quality you expect. With a chrome-plated brass faucet body and ceramic cartridges engineered for durability, you can install this model with confidence. It boasts a set of 8" adjustable centers, while the deck-mounted design is easy to install with 1/2" male NPS inlets.
Sturdy and Consistent
This faucet features a 16" long swing spout that moves easily around the sink bowl, while a 2 GPM aerator provides a consistent flow rate and minimal splashing. The sturdy lever handle design makes it easy to turn the water flow off and on.
Efficient Design
This faucet uses ceramic cartridges, which provide a much lower fail rate than the compression cartridges widely used in the industry. In this design, 2 ceramic discs fit together to create a watertight seal when closed. This removes the need for a rubber seat washer, which is one of the most frequently replaced parts on a faucet.
Watch more videos
Regency Mounted Faucets
Regency mounted faucets are the perfect option when you need a dependable water fixture in your establishment.
Specifications
- Spout Length 16 Inches
- Faucet Height 6 3/16 Inches
- Cartridge Type Ceramic
- Faucet Centers 8 Inches
- Features NSF/ANSI 372
- Features NSF/ANSI 61
- Finish Chrome
- Flow Rate 2 GPM
- Handle Type Lever
- Material Brass
- Mounting Style Deck Mounted
- Mounting Type Workboard
- Rough In 8 Inches
- Spout Clearance 3 7/8 Inches
- Spout Type Swing
- Sprayer Without Sprayer
- Temperature Rating 140 Degrees F
- Thread Size 55/64"-27 UNS
- Type Faucets
- Water Inlet Size 1/2 Inches
Frequently Asked Questions
View all FAQsThis product cannot be shipped to Canada.
When installing a faucet, these are some of the most common measurements you’ll need:
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
For both wall and deck mounted faucets, installation kits are sold separately. Check the Works With items to find the proper installation kits and parts!
We’re here to support you with your product
Visit Support Center-
WarrantyLearn about Regency’s warranty coverageView PDF (136.03 KB)
-
SpecificationsKey Features and FunctionsView PDF (2.48 MB)
-
Parts & AccessoriesFind parts and accessoriesBrowse parts
-
Contact UsQuestions or concerns? We’re here to help.Send message
-
Instructional VideosHow-to's, Troubleshooting and MaintenanceWatch videos
